text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prezzo:  £5,720.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  £500.00
Breve panoramica:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  £428.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
In giacenza - Spedizione in 1-2 giorni
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
ID: G39031401
Prezzo:  £705.00
Breve panoramica: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  £42.00
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  £9.00
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  8mm
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  £15.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  £75.00
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Prezzo:  £19.00
Breve panoramica:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Length:  10mm
  • Diameter:  15mm
In giacenza - Spedizione in 1-2 giorni
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prezzo:  55,00 £
Breve panoramica:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Length:  50mm
  • Diameter:  16mm
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prezzo:  1.591,00 £
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1.036,00 £
Breve panoramica:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M4
  • Application:  Multisensor CMM
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Prezzo:  9,00 £
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  15mm
  • Diameter:  8mm
In giacenza - Spedizione in 1-2 giorni
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prezzo:  16,00 £
Breve panoramica:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prezzo:  16,00 £
Breve panoramica:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prezzo:  2.245,00 £
Breve panoramica:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
In giacenza - Spedizione in 1-2 giorni
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Prezzo:  231,00 £
Breve panoramica:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  19,00 £
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  20mm
  • Diameter:  16mm
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Prezzo:  19,00 £
Breve panoramica:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  44,00 £
Breve panoramica:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Size:  130 x 30 mmmm
In giacenza - Spedizione in 1-2 giorni