text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

154 product(en) gevonden

ID: GB-0122-1000

Prijs: zł2,801,500.00

Beknopt overzicht: SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.

Probe Compatibility: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prijs: zł2,430.00

Beknopt overzicht: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prijs: zł2,097.00

Beknopt overzicht: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Op voorraad – Verzendtijd 1-2 dagen

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Prijs:

Beknopt overzicht:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prijs: zł3,978.00

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prijs: zł139.50

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: zł189.00

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Pillar Kit

ID: FX-PILLAR__KIT

Prijs: zł4,405.50

Beknopt overzicht: The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.

Op voorraad – Verzendtijd 1-2 dagen

Standoff Adjustable (M8)

ID: FX-HEIGHT

Prijs: zł265.50

Beknopt overzicht: The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.

Length: 50mm
Diameter: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Cap Screw Set M8 (L = 16 mm)

ID: FX-CAPM8__16

Prijs: zł76.50

Beknopt overzicht: Cap screws are used to mount Swift-Fix components on the base plate.

Thread: M8

Op voorraad – Verzendtijd 1-2 dagen

Cap Screw Set M8 (L = 20 mm)

ID: FX-CAPM8__20

Prijs: zł76.50

Beknopt overzicht: Cap screws are used to mount Swift-Fix components on the base plate.

Thread: M8

Op voorraad – Verzendtijd 1-2 dagen

Standoff Pin M8 (D= 16 mm/L= 20 mm)

ID: FX-SO__PIN

Prijs: zł90.00

Beknopt overzicht: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Length: 25mm
Diameter: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Slider Block (M8)

ID: FX-SLIDER

Prijs: zł108.00

Beknopt overzicht: A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.

Thread: M8

Op voorraad – Verzendtijd 1-2 dagen

Pillar 30x30x200mm

ID: FX-PR30__200

Prijs: €44.00

Beknopt overzicht: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Size: 30 x 30 x 200mm

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Prijs: €1,800.00

Beknopt overzicht: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M4
Application: Multisensor CMM

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Gold Kit

ID: FX-GOLD__KIT

Prijs: €2,442.00

Beknopt overzicht: With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M8
Application: CMM, Portable Measuring Arm

Op voorraad – Verzendtijd 1-2 dagen

Kinematic Support Kit

ID: FX-KINKIT

Prijs: €251.00

Beknopt overzicht: The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.

Op voorraad – Verzendtijd 1-2 dagen

Standoff Magnet (D = 16 mm / L = 20 mm)

ID: FX-SO__MAG

Prijs: €20.00

Beknopt overzicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Length: 20mm
Diameter: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Silver Kit

ID: FX-SILVER__KIT

Prijs: €1,621.00

Beknopt overzicht: The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M8
Application: CMM, Portable Measuring Arm

Op voorraad – Verzendtijd 1-2 dagen

Universal Clamp (M8)

ID: FX-CLAMP

Prijs: €107.00

Beknopt overzicht: The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.

Thread: M8

Op voorraad – Verzendtijd 1-2 dagen

Toegevoegd aan uw winkelwagen.

Previous
1(current)
2
3
4
5
Next

Productbeschikbaarheid per winkellocatie

Uren

CMM

Filters