text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 154 producto(s)

SWIFT-SET

ID: GB-0122-1000

Precio: CHF7,475.00

Resumen: SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.

Probe Compatibility: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Existencias disponibles - Envío en 1-2 días

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Precio: CHF540.00

Resumen: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Existencias disponibles - Envío en 1-2 días

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Precio: CHF466.00

Resumen: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Existencias disponibles - Envío en 1-2 días

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Precio:

Resumen:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Precio: CHF884.00

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Precio: CHF31.00

Resumen: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Vee Block Twin

ID: FV-VEETWIN

Precio: CHF42.00

Resumen: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Existencias disponibles - Envío en 1-2 días

Pillar Kit

ID: FX-PILLAR__KIT

Precio: CHF979.00

Resumen: The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.

Existencias disponibles - Envío en 1-2 días

Standoff Adjustable (M8)

ID: FX-HEIGHT

Precio: CHF59.00

Resumen: The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.

Length: 50mm
Diameter: 16mm

Existencias disponibles - Envío en 1-2 días

Cap Screw Set M8 (L = 16 mm)

ID: FX-CAPM8__16

Precio: CHF17.00

Resumen: Cap screws are used to mount Swift-Fix components on the base plate.

Thread: M8

Existencias disponibles - Envío en 1-2 días

Cap Screw Set M8 (L = 20 mm)

ID: FX-CAPM8__20

Precio: CHF17.00

Resumen: Cap screws are used to mount Swift-Fix components on the base plate.

Thread: M8

Existencias disponibles - Envío en 1-2 días

Standoff Pin M8 (D= 16 mm/L= 20 mm)

ID: FX-SO__PIN

Precio: CHF20.00

Resumen: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Length: 25mm
Diameter: 16mm

Existencias disponibles - Envío en 1-2 días

Slider Block (M8)

ID: FX-SLIDER

Precio: CHF24.00

Resumen: A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.

Thread: M8

Existencias disponibles - Envío en 1-2 días

Pillar 30x30x200mm

ID: FX-PR30__200

Precio: CHF44.00

Resumen: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Size: 30 x 30 x 200mm

Existencias disponibles - Envío en 1-2 días

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Precio: 1 800,00 CHF

Resumen: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M4
Application: Multisensor CMM

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Gold Kit

ID: FX-GOLD__KIT

Precio: 2 442,00 CHF

Resumen: With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M8
Application: CMM, Portable Measuring Arm

Existencias disponibles - Envío en 1-2 días

Kinematic Support Kit

ID: FX-KINKIT

Precio: zł1,129.50

Resumen: The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.

Existencias disponibles - Envío en 1-2 días

Standoff Magnet (D = 16 mm / L = 20 mm)

ID: FX-SO__MAG

Precio: CHF20.00

Resumen: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Length: 20mm
Diameter: 16mm

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Silver Kit

ID: FX-SILVER__KIT

Precio: CHF1,621.00

Resumen: The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M8
Application: CMM, Portable Measuring Arm

Existencias disponibles - Envío en 1-2 días

Universal Clamp (M8)

ID: FX-CLAMP

Precio: CHF107.00

Resumen: The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.

Thread: M8

Existencias disponibles - Envío en 1-2 días

Añadido a la cesta de la compra.

Previous
1(current)
2
3
4
5
Next

Disponibilidad de productos por ubicación de tienda

Horas

MMC

Filtros