text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. CMM

CMM

SWIFT-SET
SWIFT-SET
N° : GB-0122-1000
Prix:  €6,500.00
Vue d'ensemble sommaire:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  €540.00
Vue d'ensemble sommaire:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  €466.00
Vue d'ensemble sommaire:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
En stock - Livraison sous 1 à 2 jours
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
N° : G39031401
Prix: 
Vue d'ensemble sommaire: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  €884.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  38,13 $
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
Vee Block Twin
N° : FV-VEETWIN
Prix:  51,66 $
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
En stock - Livraison sous 1 à 2 jours
Pillar Kit
Pillar Kit
N° : FX-PILLAR__KIT
Prix:  $858.00
Vue d'ensemble sommaire:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
En stock - Livraison sous 1 à 2 jours
Standoff Adjustable (M8)
Standoff Adjustable (M8)
N° : FX-HEIGHT
Prix:  €59.00
Vue d'ensemble sommaire:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Length:  50mm
  • Diameter:  16mm
En stock - Livraison sous 1 à 2 jours
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
N° : FX-CAPM8__16
Prix:  €17.00
Vue d'ensemble sommaire:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
N° : FX-CAPM8__20
Prix:  €17.00
Vue d'ensemble sommaire:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
N° : FX-SO__PIN
Prix:  €20.00
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  25mm
  • Diameter:  16mm
En stock - Livraison sous 1 à 2 jours
Slider Block (M8)
Slider Block (M8)
N° : FX-SLIDER
Prix:  €24.00
Vue d'ensemble sommaire:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x200mm
Pillar 30x30x200mm
N° : FX-PR30__200
Prix:  €44.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 200mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
N° : FV-STARTERKIT
Prix:  €1,800.00
Vue d'ensemble sommaire:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Thread:  M4
  • Application:  Multisensor CMM
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
N° : FX-GOLD__KIT
Prix:  €2,442.00
Vue d'ensemble sommaire:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
En stock - Livraison sous 1 à 2 jours
Kinematic Support Kit
Kinematic Support Kit
N° : FX-KINKIT
Prix:  €251.00
Vue d'ensemble sommaire:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
En stock - Livraison sous 1 à 2 jours
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
N° : FX-SO__MAG
Prix:  €20.00
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  20mm
  • Diameter:  16mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Silver Kit
Swift-Fix - Silver Kit
N° : FX-SILVER__KIT
Prix:  €1,621.00
Vue d'ensemble sommaire:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
En stock - Livraison sous 1 à 2 jours
Universal Clamp (M8)
Universal Clamp (M8)
N° : FX-CLAMP
Prix:  €107.00
Vue d'ensemble sommaire:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours