text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

154 product(en) gevonden

SWIFT-SET

ID: GB-0122-1000

Prijs: CHF7,475.00

Probe Compatibility: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prijs: CHF540.00

Beknopt overzicht: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prijs: CHF466.00

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Op voorraad – Verzendtijd 1-2 dagen

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Prijs: CHF892.40

Beknopt overzicht:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Op voorraad – Verzendtijd 1-2 dagen

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Prijs: CHF14.00

Beknopt overzicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Length: 10mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)

ID: FC-70SS3

Prijs: CHF900.00

Beknopt overzicht: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 70mm
Clamping Range Outside (A): 1 - 71mm
Clamping Range Inside (I): 18 - 66mm
Fixing: M4 / M8

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prijs: CHF884.00

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: CHF42.00

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prijs: CHF9.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prijs: CHF695.00

Threa: M8

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Prijs: CHF968.00

Beknopt overzicht: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Threa: M8
Application: CMM, Portable Measuring Arm

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Prijs: CHF9.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 25mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Standoff Support (M4)

ID: FV-SOSUP

Prijs: CHF21.85

Beknopt overzicht: The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.

Length: 6mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 400x400x12mm (M8)

ID: FX-BP400__400

Prijs: €1,030.00

Threa: M8

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 400x600x12mm (M8)

ID: FX-BP400__600

Prijs: €1,750.00

Threa: M8

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Prijs: €1,140.00

Beknopt overzicht: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Threa: M4
Application: Multisensor CMM

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 15 mm)

ID: FV-SO8__15

Prijs: €10.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.