Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
  1. Home
  2. Katalog
  3. KMG

KMG

HR-SP-110 Rack Extension (L = 110 mm)
HR-SP-110 Rack Extension (L = 110 mm)
ID: 03969486
Preis:  £157.00
Schnellübersicht:  110 mm support pillar for a total height of 200 mm
  • Length:  110
  • Diameter:  19.5
Auf Lager – Versand 1–2 Tage
HR-SP-160 Rack Extension (L = 160 mm)
HR-SP-160 Rack Extension (L = 160 mm)
ID: 03969487
Preis:  £157.00
Schnellübersicht:  160 mm support pillar for a total height of 250 mm
  • Length:  160
  • Diameter:  19.5
Auf Lager – Versand 1–2 Tage
Safety Pin for HR-MP Rack
Safety Pin for HR-MP Rack
ID: 03969488
Preis:  £47.00
Schnellübersicht:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Length:  22
  • Diameter:  8
Auf Lager – Versand 1–2 Tage
HR-SP-60 Rack Extension (L = 60 mm)
HR-SP-60 Rack Extension (L = 60 mm)
ID: 03969485
Preis:  £157.00
Schnellübersicht:  60 mm support pillar for a total height of 150 mm.
  • Length:  60
  • Diameter:  19.5
Auf Lager – Versand 1–2 Tage
Cleaning Putty
Cleaning Putty
ID: 03969650
Preis:  £15.00
Schnellübersicht:  Putty for cleaning dust and dirt from parts, devices and measurement equipment.
Auf Lager – Versand 1–2 Tage
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Preis:  £447.00
Schnellübersicht: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.
Auf Lager – Versand 1–2 Tage
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Preis:  £818.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
Auf Lager – Versand 1–2 Tage
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
ID: FC-70SS3
Preis:  £827.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing:  M4 / M8
Auf Lager – Versand 1–2 Tage
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Preis:  £45.00
Schnellübersicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Auf Lager – Versand 1–2 Tage
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Preis:  £9.00
Schnellübersicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
Auf Lager – Versand 1–2 Tage
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Preis:  £15.00
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  16
Auf Lager – Versand 1–2 Tage
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Preis:  £75.00
Schnellübersicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Auf Lager – Versand 1–2 Tage
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Preis:  £23.00
Schnellübersicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100
  • Diameter:  16
Auf Lager – Versand 1–2 Tage
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Preis:  £29.00
Schnellübersicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Auf Lager – Versand 1–2 Tage
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Preis:  58,08 £
Schnellübersicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mm
Auf Lager – Versand 1–2 Tage
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Preis:  1 163,36 £
Schnellübersicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
Auf Lager – Versand 1–2 Tage
Support Stop
Support Stop
ID: FX-SUP__STOP
Preis:  35.773,00 zł
Schnellübersicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Threa:  M8
Auf Lager – Versand 1–2 Tage
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Preis:  18.102,00 zł
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  20
  • Diameter:  16
Auf Lager – Versand 1–2 Tage
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Preis:  17.671,00 zł
Schnellübersicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 150
Auf Lager – Versand 1–2 Tage
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Preis:  10.775,00 zł
Schnellübersicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Threa:  M8
Auf Lager – Versand 1–2 Tage