text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
ID: 03969486
Cena:  €173.00
Szybki podgląd:  110 mm support pillar for a total height of 200 mm
  • Length:  110
  • Diameter:  19.5
W magazynie — wysyłka 1–2 dni
ID: 03969487
Cena:  €173.00
Szybki podgląd:  160 mm support pillar for a total height of 250 mm
  • Length:  160
  • Diameter:  19.5
W magazynie — wysyłka 1–2 dni
ID: 03969488
Cena:  €52.00
Szybki podgląd:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Length:  22
  • Diameter:  8
W magazynie — wysyłka 1–2 dni
ID: 03969485
Cena:  €173.00
Szybki podgląd:  60 mm support pillar for a total height of 150 mm.
  • Length:  60
  • Diameter:  19.5
W magazynie — wysyłka 1–2 dni
ID: 03969650
Cena:  €17.00
Szybki podgląd:  Putty for cleaning dust and dirt from parts, devices and measurement equipment.
W magazynie — wysyłka 1–2 dni
ID: C55918029
Cena:  €492.00
Szybki podgląd: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

W magazynie — wysyłka 1–2 dni
ID: FX-BP300__400
Cena:  €900.00
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni
ID: FX-CTSML
Cena:  €32.00
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
ID: FV-FEMALE
Cena:  zł142.00
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
ID: FV-VEETWIN
Cena:  zł202.00
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
ID: FV-GUIDE480
Cena:  zł1,127.00
Szybki podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plate Compatibility :  FV-200-200C, FV-200/200F, FV-200/200P
W magazynie — wysyłka 1–2 dni
ID: FV-SO8__20
Cena:  zł43.00
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  8
W magazynie — wysyłka 1–2 dni
ID: FV-CONEADJ
Cena:  zł95.00
Szybki podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Threa:  M4
W magazynie — wysyłka 1–2 dni
ID: FX-CTMED
Cena:  zł142.00
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
ID: FX-BP300__300
Cena:  zł3,354.00
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni
ID: FV-LATSML
Cena:  zł168.00
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  10
  • Diameter:  8
W magazynie — wysyłka 1–2 dni
ID: FX-BRONZE__KIT
Cena:  zł4,343.00
Szybki podgląd:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
W magazynie — wysyłka 1–2 dni
ID: FV-SO8__25
Cena:  zł43.00
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  25
  • Diameter:  8
W magazynie — wysyłka 1–2 dni
ID: FV-SOSUP
Cena:  77,00 zł
Szybki podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Length:  6
  • Diameter:  8
W magazynie — wysyłka 1–2 dni
ID: FX-BP400__400
Cena:  435 741,00 zł
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni