text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 154 producto(s)

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Precio: CHF621.00

Resumen: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Existencias disponibles - Envío en 1-2 días

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Precio: CHF535.90

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Existencias disponibles - Envío en 1-2 días

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Precio: CHF892.40

Resumen:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Existencias disponibles - Envío en 1-2 días

HA-M-200 Probe Extension M8 (L = 200 mm)

ID: 03969067

Precio: CHF270.25

Length (L): 200mm
Material: Aluminium

Existencias disponibles - Envío en 1-2 días

HA-M-50 Probe Extension M8 (L = 50 mm)

ID: 03969065

Precio: CHF203.55

Length (L): 50mm
Material: Aluminium

Existencias disponibles - Envío en 1-2 días

HA-M Probe Extension Kit M8

ID: 03969077

Precio: CHF678.50

Existencias disponibles - Envío en 1-2 días

Angular Adapter Set TKJ (4 pc.)

ID: 03969394

Precio: CHF2,967.00

Existencias disponibles - Envío en 1-2 días

HA-M-100 Probe Extension M8 (L = 100 mm)

ID: 03969066

Precio: CHF236.90

Length (L): 100mm
Material: Aluminium

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Precio: CHF1,016.60

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Precio: 32,00 €

Resumen: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Vee Locator

ID: FV-FEMALE

Precio: 32,00 €

Resumen: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Existencias disponibles - Envío en 1-2 días

Vee Block Twin

ID: FV-VEETWIN

Precio: CHF42.00

Resumen: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Existencias disponibles - Envío en 1-2 días

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Precio: CHF236.00

Resumen: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Plate Compatibility : FV-200-200C, FV-200/200F, FV-200/200P

Existencias disponibles - Envío en 1-2 días

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Precio: CHF9.00

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20mm
Diameter: 8mm

Existencias disponibles - Envío en 1-2 días

Cone Adjustable (M4)

ID: FV-CONEADJ

Precio: CHF14.00

Resumen: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Threa: M4

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Precio: CHF31.00

Resumen: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Thumb Screw M8

ID: FX-THUMB

Precio: CHF9.00

Resumen: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Threa: M8

Existencias disponibles - Envío en 1-2 días

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Precio: 17,00 €

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.