text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET
SWIFT-SET
N° : GB-0122-1000
Prix:  CHF7,475.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  CHF621.00
Vue d'ensemble sommaire:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  CHF535.90
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  CHF10.35
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  8mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
N° : FX-SO16__20
Prix:  CHF18.40
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
Spring Clamp (M8)
N° : FX-SPRING
Prix:  CHF55.20
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
N° : FX-SUB45__120
Prix:  CHF62.10
Vue d'ensemble sommaire:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mmmm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
N° : FX-STARTER__KIT
Prix:  CHF1,259.25
Vue d'ensemble sommaire:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  CHF1,023.50
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing (G):  M3
En stock - Livraison sous 1 à 2 jours
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
N° : FC-70SS3
Prix:  CHF1,035.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  CHF1,016.60
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  CHF35.65
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
Vee Block Twin
N° : FV-VEETWIN
Prix:  CHF48.30
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  CHF84.00
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
En stock - Livraison sous 1 à 2 jours
Spring Nut (M8)
Spring Nut (M8)
N° : FX-M8SPRGNUT
Prix:  CHF33.00
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
N° : FX-LATMED
Prix:  CHF54.00
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  20mm
  • Diameter:  16mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
N° : FX-BRONZE__KIT
Prix:  CHF1,010.00
Vue d'ensemble sommaire:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x150mm
Pillar 30x30x150mm
N° : FX-PR30__150
Prix:  CHF43.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 150mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
N° : FV-SO8__25
Prix:  CHF10.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  25mm
  • Diameter:  8mm
En stock - Livraison sous 1 à 2 jours
Tension Post (M8)
Tension Post (M8)
N° : FX-POST
Prix:  CHF27.00
Vue d'ensemble sommaire:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Threa:  M8
En stock - Livraison sous 1 à 2 jours