Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Price:  zł2,801,500.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  zł274,978.00
Quick Overview:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  zł235,757.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Price:  zł24,567.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Price:  zł9,051.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  30
  • Diameter:  20
In Stock - Despatched 1-2 Days
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Price:  zł46,548.00
Quick Overview:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Vee Locator
Vee Locator
ID: FX-VEE
Price:  zł37,928.00
Quick Overview:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Price:  zł10,775.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  20
  • Diameter:  16
In Stock - Despatched 1-2 Days
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Price:  zł24,136.00
Quick Overview:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Size:  130 x 30 mm
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Price:  zł9,051.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  30
  • Diameter:  16
In Stock - Despatched 1-2 Days
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Price:  zł10,775.00
Quick Overview:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  25
  • Diameter:  16
In Stock - Despatched 1-2 Days
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Price:  zł12,930.00
Quick Overview:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  zł456,860.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Price:  zł16,378.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Vee Locator
Vee Locator
ID: FV-FEMALE
Price:  zł16,378.00
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
In Stock - Despatched 1-2 Days
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  zł128,869.00
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plate Compatibility :  FV-200-200C, FV-200/200F, FV-200/200P
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Price:  zł4,741.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  8
In Stock - Despatched 1-2 Days
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Price:  zł21,119.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 150
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Price:  zł4,741.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  25
  • Diameter:  8
In Stock - Despatched 1-2 Days
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Price:  zł13,361.00
Quick Overview:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Threa:  M8
In Stock - Despatched 1-2 Days