Quick overview: Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 2-150. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
Quick overview: Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 76-150. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For permanently adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 2-75. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
Quick overview: Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For magnetic adhering to the workpiece.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (22 mm) for mounting on the machine tool table. Set content see description.
Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 3 mm, outer diameter: 7 mm. Quantity: 1,000 pieces
Self-adhesive, retro-reflective coded targets (No. 31 - 1050) to place on portable panels or pre-calibrated rooms for reverse-positioning scanning technology. Delivered in 2 boxes with 55 pieces each. Size: 10 x 10 cm
Self-adhesive, non-coded positioning targets for stick on the surface of workpiece to do scanning job. Inner diameter: 16 mm, outer diameter: 25 mm. Quantity: 300 pieces
