text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. Macchina utensile

Macchina utensile

LS-C-5.8 Carrying Case
LS-C-5.8 Carrying Case
ID: LS-C-5.8-CASE
Prezzo: 
Breve panoramica:  Carrying case for storage and transport of the Hexagon LS-C-5.8 Laser Scanner Systems for machine tools.
  • Velikost:  464 x 363 x 176 mm
  • Materiál:  Plastics
  • Kompatibilita:  LS-C-5.8
In giacenza - Spedizione in 1-2 giorni
Extension for 3D-FI Calibration Ball
Extension for 3D-FI Calibration Ball
ID: 3D-FI Extension 45
Prezzo:  £82.00
Breve panoramica:  Extension with 45° angle for calibration balls for machine tools.
In giacenza - Spedizione in 1-2 giorni
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Prezzo:  £476.08
Breve panoramica: 

Short description Text
In giacenza - Spedizione in 1-2 giorni
Taper Shank ANSI B5.50/CAT50
Taper Shank ANSI B5.50/CAT50
ID: D28-CAT50-W
Prezzo:  £216.48
Breve panoramica: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
In giacenza - Spedizione in 1-2 giorni
Taper Shank JIS BT50
Taper Shank JIS BT50
ID: D28-BT50-W
Prezzo: 
Breve panoramica: 

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
In giacenza - Spedizione in 1-2 giorni
M4-Stylus (SN-2-TC-1.5-L19)
M4-Stylus (SN-2-TC-1.5-L19)
ID: H00027433
Prezzo: 
  • Previous Part Number:  91.00-T20/2-HM-M4-SI
  • Závi:  M4
  • Materiál kuličky:  Nitrid křemíku
  • Průměr zakončení (D):  2mm
  • Délka (L):  19mm
In giacenza - Spedizione in 1-2 giorni
Calibration Pin (D = 5 mm)
Calibration Pin (D = 5 mm)
ID: 5209
Prezzo:  96,00 CHF
Breve panoramica:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Průměr:  5mm
  • Délka:  120mm
  • Určeno pro:  Laser Tool Setter Calibration
  • Materiál:  Steel, hardened
In giacenza - Spedizione in 1-2 giorni
Calibration Pin (D = 10 mm)
Calibration Pin (D = 10 mm)
ID: 4286
Prezzo:  103,00 CHF
Breve panoramica:  Calibration pin (D = 10 mm). For use on machine tools.
  • Průměr:  10mm
  • Délka:  120mm
  • Určeno pro:  Laser Tool Setter Calibration
  • Materiál:  Steel, hardened
In giacenza - Spedizione in 1-2 giorni
Battery (3.6 V / 1/2AA)
Battery (3.6 V / 1/2AA)
ID: 4316
Prezzo:  5,00 CHF
Breve panoramica:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Velikost:  1/2 AA
  • Napětí:  3,6V
  • Capacity:  1.200mAh
  • Kompatibilita:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
In giacenza - Spedizione in 1-2 giorni
T-Nut 14 mm
T-Nut 14 mm
ID: 4274
Prezzo:  6,00 CHF
Breve panoramica:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiál:  Tempered Steel
  • Internal Thread:  M12
  • Jmenovitý rozměr T-drážky:  14mm
In giacenza - Spedizione in 1-2 giorni
M8-Extension for Calibration Set (D = 25 mm)
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prezzo:  47,00 CHF
Breve panoramica:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Průměr:  25mm
  • Délka:  75mm
  • Materiál:  Nerezová ocel
In giacenza - Spedizione in 1-2 giorni
Battery (3 V / CR2032)
Battery (3 V / CR2032)
ID: 5309
Prezzo:  3,00 CHF
Breve panoramica:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Velikost:  9 V Block
  • Napětí:  9V
  • Capacity:  1.200mAh
  • Kompatibilita:  IRP40.50
In giacenza - Spedizione in 1-2 giorni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Prezzo:  341,00 CHF
Breve panoramica:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiál:  Uhlíkové vlákno
  • Délka:  200mm
  • Průměr:  25mm
  • External Thread:  M16x1
In giacenza - Spedizione in 1-2 giorni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Prezzo:  465,00 CHF
Breve panoramica:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Délka:  150mm
  • Průměr:  25mm
  • External Thread:  M16x1
In giacenza - Spedizione in 1-2 giorni
T-Nut 22 mm
T-Nut 22 mm
ID: 4411
Prezzo:  30,00 €
Breve panoramica:  T-Nut for the mounting of measuring systems and accessories in machine tools.
In giacenza - Spedizione in 1-2 giorni
T-Nut 12 mm
T-Nut 12 mm
ID: 4418
Prezzo:  24,75 zł
Breve panoramica:  T-Nut for the mounting of measuring systems and accessories in machine tools.
In giacenza - Spedizione in 1-2 giorni
T-Nut 18 mm
T-Nut 18 mm
ID: 4431
Prezzo:  63,00 zł
Breve panoramica:  T-Nut for the mounting of measuring systems and accessories in machine tools.
In giacenza - Spedizione in 1-2 giorni
Storage Box
Storage Box
ID: 4301
Prezzo:  148,50 zł
Breve panoramica:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
In giacenza - Spedizione in 1-2 giorni
Calibration Pin (D = 4 mm / D = 10 mm)
Calibration Pin (D = 4 mm / D = 10 mm)
ID: 4420
Prezzo:  1.039,50 zł
Breve panoramica:  #N/A
In giacenza - Spedizione in 1-2 giorni
Measuring Unit Extension (Carbon)
Measuring Unit Extension (Carbon)
ID: 41.00-VE300
Prezzo:  2.236,50 zł
Breve panoramica:  Extension (300 mm) made of carbon for measuring units on machine tools.
In giacenza - Spedizione in 1-2 giorni