text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: GB-0122-1000
Prijs:  €6,500.00
Beknopt overzicht:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Kompatibilita:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Op voorraad – Verzendtijd 1-2 dagen
ID: GB0122-0008
Prijs:  €550.00
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Kompatibilita:  HP-S-X1 Stylus Clampings
  • Průměr:  60mm
Op voorraad – Verzendtijd 1-2 dagen
ID: GB0122-0019
Prijs:  €471.00
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Kompatibilita:  HP-S-X3 Stylus Clampings
  • Průměr:  40mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__300
Prijs:  €750.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Závi:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-PILLAR__KIT
Prijs:  €990.00
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO__SUPP
Prijs:  €21.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Délka:  10mm
  • Průměr:  15mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-HEIGHT
Prijs:  €60.00
Beknopt overzicht:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Délka:  50mm
  • Průměr:  16mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP400__600
Prijs:  €1,750.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Závi:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO8__15
Prijs:  €10.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Délka:  15mm
  • Průměr:  8mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO__MAG
Prijs:  €21.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Délka:  20mm
  • Průměr:  16mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-LATLGE
Prijs:  €61.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Délka:  20mm
  • Průměr:  20mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-ARM
Prijs:  €138.00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Závi:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SPRING
Prijs:  €45.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Závi:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-KINKITPLUS
Prijs:  €266.00
Beknopt overzicht:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Op voorraad – Verzendtijd 1-2 dagen
ID: KPP-300__300
Prijs:  €530.00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Kompatibilita desek :  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
ID: KPP-500__500
Prijs:  €810.00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Kompatibilita desek :  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
ID: KPT-300__300
Prijs:  €790.00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Kompatibilita desek :  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
ID: KB-400__400
Prijs:  €990.00
Beknopt overzicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Kompatibilita desek :  KPP-500/500, KPT-500/500
Op voorraad – Verzendtijd 1-2 dagen
ID: KB-UNIVL
Prijs:  €670.00
Beknopt overzicht:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Kompatibilita desek :  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
Op voorraad – Verzendtijd 1-2 dagen
ID: KPT-400__400
Prijs:  €1,420.00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Kompatibilita desek :  KB-300/300, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen