text.skipToContent text.skipToNavigation

W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła

WMP

Znaleziono 155 produkt(y/ów)

ID: GB-0122-1000

Cena: €6,500.00

Szybki podgląd: SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.

Kompatibilita: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

W magazynie — wysyłka 1–2 dni

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Cena: €550.00

Szybki podgląd: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Kompatibilita: HP-S-X1 Stylus Clampings
Průměr: 60mm

W magazynie — wysyłka 1–2 dni

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Cena: €471.00

Szybki podgląd: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Kompatibilita: HP-S-X3 Stylus Clampings
Průměr: 40mm

W magazynie — wysyłka 1–2 dni

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Cena: €776.00

Szybki podgląd:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Objednávací kód: 1234567890734343

W magazynie — wysyłka 1–2 dni

Spring Clamp (M4)

ID: FV-SPRING

Cena: €45.00

Szybki podgląd: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Závi: M4

W magazynie — wysyłka 1–2 dni

Kinematic Support Kit Plus

ID: FX-KINKITPLUS

Cena: €266.00

Szybki podgląd: The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.

W magazynie — wysyłka 1–2 dni

Resting Cone (M4)

ID: FV-CONE

Cena: €15.00

Szybki podgląd: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Závi: M4

W magazynie — wysyłka 1–2 dni

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Cena: €900.00

Szybki podgląd: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Vnější průměr sklíčidla (D1): 70mm
Vnější upínací rozsah (A): 1 - 71mm
Vnitřní upínací rozsah (I): 18 - 66mm
Materiál: Nerezová ocel
Upevnění (G): M3

W magazynie — wysyłka 1–2 dni

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Cena: €910.00

Szybki podgląd: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.